20 years when stored sealed.
Covers elastomers, hoses, metals, plastics, and sealants.
Syensqo
Sales & Service, Inc. (SSI) is the Exclusive NAFTA Sales & Distribution for Galden fluids used in Electronics Testing, Vapor Phase Solder Reflow, EV/charger cooling, and Data-Center immersion.
DET is a dedicated detector fluid tailored for gross leak testing in accordance with MIL-STD-883, MIL-STD-750, and MIL-STD-202, providing reliable penetration of both fine and large defects. Its extreme inertness, cleanliness, and dielectric integrity underpin confident hermeticity verification for high-reliability microelectronics.
Galden® DET is an excellent replacement for 3M Novec FC-84, FC-72, and FC-77 fluids.
Hermetic seal leak testing — Detector fluid
Type I (C1, C3) and Type III (E). Balanced low- and high-boiling components help reveal both small and large leaks while keeping parts residue-free.
High-Voltage / Hipot Soak & Flashover Screening
Very low viscosity, strong dielectric properties for room-to-moderate-temperature insulating baths.
Carrier Fluid for Penetrants (NDT / Liquid Penetrant Concepts)
Low surface tension promotes wetting into micro-discontinuities; low bp aids fast removal.
Trace-Residue Elimination & Inspection Rinse
Excellent for flushing and quick drying without residue.
Electronic & Semiconductor Manufacturing Adjunct Tests
Defined bp (~230 °C) enables property-based vapor/liquid steps in fixtures and lab protocols.
Chemical Processing & Aerospace Test Support (Property-Based Fit)
Inert, non-flammable liquid for sensitive test fixtures and reactive-media handling.
| GALDEN® DET | GALDEN® D02 | GALDEN® D02TS | GALDEN® D03 | GALDEN® D05 | |
|---|---|---|---|---|---|
| Boiling Point | -81°C | -175°C | -165°C | -203°C | -230°C |
| Pour Point | -110°C | -97°C | -97°C | -85°C | -77°C |
| KINEMATIC VISCOSITY (25°C) | -0.6 CST | -1.8 CST | -1.7 CST | -2.4 CST | -4.4 CST |
| DIELECTRIC STRENGTH | -40KV | -40KV | -40KV | -40KV | -40KV |
| DIELECTRIC CONSTANT | -2.1 | -2.1 | -2.1 | -2.1 | -2.1 |
| VOLUME RESISTIVITY | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM |
Galden® PFPE electronic fluids is a line of dielectric fluids with boiling points ranging from 55 °C to 270 °C. Their excellent dielectric properties, high chemical and thermal stability combined with their capacity to operate at very low as well as elevated temperatures make them ideal for electronic quality testing. Fluids non-reactivity, excellent dielectric properties, nontoxicity, non-flammability and non-solvent features make Galden® PFPE electronic fluids suitable for electronic reliability testing including thermal shock and hermetic seal testing.
Looking to replace a discontinued 3M Fluorinated Fluid? Find the right match for your application below.
| Application / Test Condition | Typical 3M Fluid Recommendation | Galden® Cross Reference |
|---|---|---|
| Gross Leak, Bubble Test, Indicator Fluid | FC-40, FC-43 | D02, D03 |
| Gross Leak, Detector Fluid | FC-84, FC-72 | DET |
| Thermal Shock, Cold Bath, -65°C | FC-77 | det, d02ts |
| Thermal Shock, Hot Bath, +125°C | FC-40, fc-43 | d02, d03, d02ts |
| Thermal Shock, Hot Bath, +150°C | FC-40, FC-43 | D02, D03 |
| Thermal Shock, Hot Bath, +200°C | FC-70 | d05 |
| Thermal Shock, Single Fluid, 0 to +100°C | FC-40, fc-43 | d02, d03, d02ts |
| Thermal Shock, Single Fluid, -65 to +150°C | n/a | d02ts |
| Vapor Phase, Primary, 200°C | n/a | LS200 |
| Vapor Phase, Primary, 210°C | n/a | LS210 |
| Vapor Phase, Primary, 215°C | FC-70, FC-5312 | ls 215 |
| Vapor Phase, Primary, 230°C | N/A | ls 230 |
| Vapor Phase, Primary, 240°C | N/A | hs240 |
| Vapor Phase, Primary, 260°C | N/A | hs260 |
| liquid burn-in | FC-40, fc-43 | d02, d03, d02ts |
