20 years when stored sealed.
Covers elastomers, hoses, metals, plastics, and sealants.
Syensqo
Sales & Service, Inc. (SSI) is the Exclusive NAFTA Sales & Distribution for Galden fluids used in Electronics Testing, Vapor Phase Solder Reflow, EV/Charger Cooling, and Data-Center immersion.
Positioned for higher temperature thermal shock regimes, D05 leverages an elevated boiling point and robust stability to support aggressive operating conditions while protecting sensitive components. The result is extended process windows, consistent heat transfer, and clean operation suited for demanding reliability test environments.
Galden® D05 is an excellent replacement for 3M Novec FC 70.
Thermal shock — Hot bath
Preferred where elevated hot-step setpoints are required (shown at 200 °C in MIL-STD-883 matrices), typically paired with D02/D02TS or LN₂ for cold.
Liquid Burn-In Testing — Dielectric Heat-Transfer Bath
Highest bp here provides additional thermal headroom for hot soak fixtures.
High-Voltage / Hipot Soak & Flashover Screening
Insulating bath for elevated-temperature hipot/flashover screens.
Trace-Residue Elimination & Inspection Rinse
Low viscosity enables flushing; higher bp supports heated rinses without excessive evaporation.
Custom Liquid Cooling in Test Rigs & Fixtures
Best for the hottest fixture loops/baths requiring stable performance near ~230 °C.
Electronic & Semiconductor Manufacturing Adjunct Tests
Defined bp (~230 °C) enables property-based vapor/liquid steps in fixtures and lab protocols.
Chemical Processing & Aerospace Test Support (Property-Based Fit)
Inert, non-flammable, stable liquid for demanding environmental or reactive setups.
| GALDEN® DET | GALDEN® D02 | GALDEN® D02TS | GALDEN® D03 | GALDEN® D05 | |
|---|---|---|---|---|---|
| Boiling Point | -81°C | -175°C | -165°C | -203°C | -230°C |
| Pour Point | -110°C | -97°C | -97°C | -85°C | -77°C |
| KINEMATIC VISCOSITY (25°C) | -0.6 CST | -1.8 CST | -1.7 CST | -2.4 CST | -4.4 CST |
| DIELECTRIC STRENGTH | -40KV | -40KV | -40KV | -40KV | -40KV |
| DIELECTRIC CONSTANT | -2.1 | -2.1 | -2.1 | -2.1 | -2.1 |
| VOLUME RESISTIVITY | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM |
Galden® PFPE electronic fluids is a line of dielectric fluids with boiling points ranging from 55 °C to 270 °C. Their excellent dielectric properties, high chemical and thermal stability combined with their capacity to operate at very low as well as elevated temperatures make them ideal for electronic quality testing. Fluids non-reactivity, excellent dielectric properties, nontoxicity, non-flammability and non-solvent features make Galden® PFPE electronic fluids suitable for electronic reliability testing including thermal shock and hermetic seal testing.
Looking to replace a discontinued 3M Fluorinated Fluid? Find the right match for your application below.
| Application / Test Condition | Typical 3M Fluid Recommendation | Galden® Cross Reference |
|---|---|---|
| Gross Leak, Bubble Test, Indicator Fluid | FC-40, FC-43 | D02, D03 |
| Gross Leak, Detector Fluid | FC-84, FC-72 | DET |
| Thermal Shock, Cold Bath, -65°C | FC-77 | det, d02ts |
| Thermal Shock, Hot Bath, +125°C | FC-40, fc-43 | d02, d03, d02ts |
| Thermal Shock, Hot Bath, +150°C | FC-40, FC-43 | D02, D03 |
| Thermal Shock, Hot Bath, +200°C | FC-70 | d05 |
| Thermal Shock, Single Fluid, 0 to +100°C | FC-40, fc-43 | d02, d03, d02ts |
| Thermal Shock, Single Fluid, -65 to +150°C | n/a | d02ts |
| Vapor Phase, Primary, 200°C | n/a | LS200 |
| Vapor Phase, Primary, 210°C | n/a | LS210 |
| Vapor Phase, Primary, 215°C | FC-70, FC-5312 | ls 215 |
| Vapor Phase, Primary, 230°C | N/A | ls 230 |
| Vapor Phase, Primary, 240°C | N/A | hs240 |
| Vapor Phase, Primary, 260°C | N/A | hs260 |
| liquid burn-in | FC-40, fc-43 | d02, d03, d02ts |
