20 years when stored sealed.
Covers elastomers, hoses, metals, plastics, and sealants.
Syensqo
Available by request.
Sales & Service, Inc. (SSI) is the Exclusive NAFTA Sales & Distribution for Galden fluids used in Electronics Testing, Vapor Phase Solder Reflow, EV/Charger Cooling, and Data-Center immersion.
Galden® D02 provides a versatile balance of boiling point and viscosity, making it a proven choice for both thermal shock and hermetic seal indicator applications aligned with established MIL-STD-883 screening methodologies. Its low evaporation profile and chemical inertness translate into stable long-term performance and lower total cost of ownership under repeated cycling.
Galden® D02 is an excellent replacement for 3M Novec FC 40 and FC43 fluids.
Thermal Shock – Hot Bath (MIL)
Listed across multiple MIL-STD-883 conditions (B/C/E/F), often paired with DET or LN₂ for the cold step; hot steps to ~200 °C.
Hermetic seal testing — Indicator (MIL)
Type II, Condition C1 approach; higher bp and low vapor pressure minimize loss during test.
Liquid Burn-In Testing — Dielectric Heat-Transfer Bath
Balanced viscosity/stability for mid-range soak temperatures in powered burn-in.
High-Voltage / Hipot Soak & Flashover Screening
Insulating bath for hipot/flashover screens at moderate-high temps.
Carrier Fluid for Penetrants (NDT / Liquid Penetrant Concepts)
Low surface tension/viscosity aid wetting; bp ~175 °C limits evaporation during longer inspection cycles.
Trace-Residue Elimination & Inspection Rinse
Ambient/heated rinses for clean, residue-free parts.
Custom Liquid Cooling in Test Rigs & Fixtures
Good choice for sustained mid-to-high temperature loops and baths.
Chemical Processing & Aerospace Test Support (Property-Based Fit)
Inert liquid for lab/fixture heat-transfer near reactive media.
| GALDEN® DET | GALDEN® D02 | GALDEN® D02TS | GALDEN® D03 | GALDEN® D05 | |
|---|---|---|---|---|---|
| Boiling Point | -81°C | -175°C | -165°C | -203°C | -230°C |
| Pour Point | -110°C | -97°C | -97°C | -85°C | -77°C |
| KINEMATIC VISCOSITY (25°C) | -0.6 CST | -1.8 CST | -1.7 CST | -2.4 CST | -4.4 CST |
| DIELECTRIC STRENGTH | -40KV | -40KV | -40KV | -40KV | -40KV |
| DIELECTRIC CONSTANT | -2.1 | -2.1 | -2.1 | -2.1 | -2.1 |
| VOLUME RESISTIVITY | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM | -5×10¹⁵ Ω·CM |
Galden® PFPE electronic fluids is a line of dielectric fluids with boiling points ranging from 55 °C to 270 °C. Their excellent dielectric properties, high chemical and thermal stability combined with their capacity to operate at very low as well as elevated temperatures make them ideal for electronic quality testing. Fluids non-reactivity, excellent dielectric properties, nontoxicity, non-flammability and non-solvent features make Galden® PFPE electronic fluids suitable for electronic reliability testing including thermal shock and hermetic seal testing.
Looking to replace a discontinued 3M Fluorinated Fluid? Find the right match for your application below.
| Application / Test Condition | Typical 3M Fluid Recommendation | Galden® Cross Reference |
|---|---|---|
| Gross Leak, Bubble Test, Indicator Fluid | FC-40, FC-43 | D02, D03 |
| Gross Leak, Detector Fluid | FC-84, FC-72 | DET |
| Thermal Shock, Cold Bath, -65°C | FC-77 | det, d02ts |
| Thermal Shock, Hot Bath, +125°C | FC-40, fc-43 | d02, d03, d02ts |
| Thermal Shock, Hot Bath, +150°C | FC-40, FC-43 | D02, D03 |
| Thermal Shock, Hot Bath, +200°C | FC-70 | d05 |
| Thermal Shock, Single Fluid, 0 to +100°C | FC-40, fc-43 | d02, d03, d02ts |
| Thermal Shock, Single Fluid, -65 to +150°C | n/a | d02ts |
| Vapor Phase, Primary, 200°C | n/a | LS200 |
| Vapor Phase, Primary, 210°C | n/a | LS210 |
| Vapor Phase, Primary, 215°C | FC-70, FC-5312 | ls 215 |
| Vapor Phase, Primary, 230°C | N/A | ls 230 |
| Vapor Phase, Primary, 240°C | N/A | hs240 |
| Vapor Phase, Primary, 260°C | N/A | hs260 |
| liquid burn-in | FC-40, fc-43 | d02, d03, d02ts |
